The Challenge: Constant Leakage at a Commercial Facility
An industrial client in Machakos was facing a persistent problem with a 24,000-liter storage tank. A crack had developed exactly where the outlet fitting joined the tank body. Despite several attempts with sealants and epoxies, the vibration and weight of the heavy-duty piping caused the leak to reappear every few days, wasting thousands of liters of treated water.
Our Solution: Removing the "Quick Fix" and Performing a Real Weld
Sealants and glues are only temporary fixes; they cannot withstand the expansion and contraction of plastic. Our team arrived and first removed all the failed epoxy layers to expose the real damageāa 15cm stress crack branching out from the outlet fitting.
The Restoration Process:
- Precision Grinding: We ground down the crack into a deep V-groove to allow for maximum penetration of the weld material.
- Reinforcement Welding: Using high-density polyethylene (HDPE) welding rods and professional extruders, we "re-built" the area around the outlet, essentially fusing the fitting into the tank as a single, solid piece of plastic.
- Stress Relief: We ensured the surrounding plastic was properly stabilized to prevent future stress fractures from the attached plumbing.
The Result: A Permanent Industrial Solution
After testing the tank under full load, the repair held perfectly. By choosing professional plastic welding over another "patch job," the client avoided further water loss and the immense cost of replacing an industrial-grade tank. This repair is guaranteed for 12 months, ensuring the facility's operations remain uninterrupted.
More on Industrial Repair Services